PROG
START
49
AM:PM
ENGLISH
FAHRENH
PROG
START
WATER
WATER
To specify settings
■
Turn unit on. If unit is already on, switch off and turn on again.
■
Press TEMPERATURE and TIMER keys simultaneously for about 10 seconds
or until the TIMER display reads “24:00” or “AM:PM”.
■
Select the desired time format using the Central Dial.
■
Press the TEMPERATURE key to save the selected time format and activate the
next setting, language selection. Select the desired language using the Central Dial.
■
Press the TEMPERATURE key to save language selection and move to the next
step, temperature selection. Select “CELSIUS” or “FAHRENH” using the
Central Dial.
■
Press PROG/START to save all selections and exit.
NOTE:
If you have chosen the USER language selection, DO NOT exit with
PROG/START.
To convert text commands to User language:
■
Press TEMPERATURE key again to begin converting text commands. The first
term appears in English (default language) in the temperature display. The term
is repeated in English in the program display with a flashing cursor under the
first character.
■
Using the Central Dial select the letters for the desired spelling of the term in the
user’s preferred language. Press the IQT key after each letter selection to confirm
it and advance the cursor.
■
When done, press the TEMPERATURE key to access the next term and
proceed in this manner.
■
Press PROG/START at any time to save all entries and exit User language text
conversion.
Setting the clock
The unit’s clock can be set to display continuous operation or real time. Automatic
start-up time can also be set.
■
Be sure unit is on and NO cooking mode is selected
To display continuous operation:
■
Press the TIMER key once to display “00:00 A:M.”
■
Press and hold TIMER briefly to display “DURATION”.
COOKING
FUNCTIONS