Henny Penny Chick-fil-A Controls 500, Руководство пользователя

Страница: 5 / 56

Henny Penny Chick-fil-A Controls
2-1. OPERATING CONTROLS
Figure 2-2 shows the location of following computer control
items.
Figure Item Description Function
No. No.
2-2 1 Lights when the control calls for heat and the peanut oil should
start heating.
2-2 2 Digital Display Shows all the functions of the cooking cycle, Program Mode,
Diagnostic Mode and alarms.
2-2 3 Lights when the solenoid closes and pressure starts to build inside
frypot.
2-2 4 Flashes when the peanut oil temperature is NOT at the proper
temperature for dropping product into the frypot.
2-2 5 Lights when the peanut oil temperature is 5°F below setpoint to
15°F above the cooking temperature, signaling product can now
be be cooked.
2-2 6 Press to display current fryer information and status. If pressed in
the Program Mode, shows previous settings. Pressing this along
with accesses the Information Mode which has
historic information on the Operator and fryer performance.
2-2 7 Used to adjust the value of the currently displayed setting in the
Program Modes.
2-2 8 Press to access Program Mode. Once in the Program Mode, it is
used to advance to the next setting. If pressed along with it
accesses the Information Mode which has historic information on
the Operator and fryer performance. It also allows access to
the English-Spanish settings, diagnostics, Clean-Out Mode, and
Manual Mode, if pressed before the appropriate button.
2-2 9 Used to start and stop cooking cycles and to stop the timer at the
end of a holding cycle. It is also used to program a Manual
Program for nonstandard products.
602 2-1
SECTION 2. OPERATION