Henny Penny Chick-fil-A Controls 500 Скачать руководство пользователя страница 46

Страница: 46 / 56

Henny Penny

Chick-fil-A Controls

The final item in section 10 identifies if any changes have been made to
the Heat Control settings. These settings affect the fryer’s heating
algorithms, and include the PC factors, rate-of-rise compensations, and
heat pulse cycle time, etc.

“10: ALL HC ITEMS”

“10: 3 HC ITEMS”

“10: MATCH”

“10: DO NOT MATCH”

“10: ORIG. VALUES”

This historic information in this mode can be recorded and used for
operational and technical help.

Press and at the same time and

“*INFO MODE*”

shows in the display, followed by

“1. E-LOG”

Press and hold to exit Information Mode at any time, or
after 2 minutes, controls automatically exit back to normal
operation.

1. E-LOG

(error code log)

Press and

“1A. (date & time) *NOW*

shows in display. This

is the present date and time.

Press and if a error was recorded,

“1B. (date, time, and error

code infromation)”

shows in display. This is the latest error code that

the controls recorded.

Press and the next latest error code information can be seen. Up

to 10 error codes (1B to 1K) can be stored in the E-LOG section.

Press to continue to P-LOG.

2. P-LOG

(power-up log)

Press and

“2A. (date & time) *NOW*

shows in display. This

is the present date and time.

Press and the latest power-up is shown,

“2B. (date, time,)

PWR-UP”

3-3. DIAGNOSTIC MODE
DETAILS (Continued)

3-4. INFORMATION MODE
DETAILS

3-26

Содержание Chick-fil-A Controls 500

























































Результаты поиска

Содержание Chick-fil-A Controls 500

Отзывы:

Бренды по названию

Популярные бренды

Henny Penny Chick-fil-A Controls 500, Руководство пользователя

Результаты поиска

Содержание Chick-fil-A Controls 500

Отзывы:

Бренды по названию

Популярные бренды