Henny Penny Chick-fil-A Controls 500, Руководство пользователя

Страница: 27 / 56

Henny Penny Chick-fil-A Controls
Problem Cause Correction
PRESSURE SECTION (Continued)
Pressure does not
•
Not enough product in fryer
•
Place proper quantity of
build or product not fresh. fresh product within frypot to
generate steam.
•
Metal shipping spacer not
•
Remove shipping spacer.
removed from dead weight. See Unpacking Section.
•
Lid open or not latched.
•
Close and latch lid.
•
Solenoid valve leaking or
•
Have solenoid valve checked or
not closing. cleaned.
•
Dead weight valve leaking.
•
Have Dead weight valve
repaired.
•
Pressure not programmed.
•
See Diagnostic Mode
D 10
,
page 3-24. If pressure
settings have been changed,
have the controls reintialized..
•
Lid gasket leaking.
•
Reverse gasket or lid needs
adjusted.
•
Safety relief valve leaking.
•
Check and replace if necessary.
FILTER SYSTEM SECTION
Filter motor runs • Pump clogged • Have pump cleaned.
but pumps peanut oil
slowly
• Filter line connection • Tighten all filter line
loose. connections.
• Solidified peanut oil • Clear all filter lines of solidified
in lines peanut oil.
Filter switch on, • Defective Cook/ Pump switch • Have switch checked.
motor does not run
• Defective motor • Have motor checked.
• Motor thermal protector tripped • Reset thermal protector.
602 3-7