HENNESSY INDUSTRIES Coats 1185, Руководство по эксплуатации

Страница: 8 / 32

2 • Important: Always read and follow instructions.
Principle Operating Parts
Know Your Unit
Compare this illustration with the unit before placing
it into service. Maximum performance and safety
will be obtained only when all persons using the unit
are fully trained in its parts and operation. Each user
should learn the function and location, of all controls.
Prevent accidents and injuries by ensuring the unit is
properly installed, operated and maintained.
A -
Video Display Panel
B -
Touch Control Panel
C -
Weight Tray with Pockets for Corrective
Weights
D -
Hood Guard
E -
Offset Arm, Measures A & D of Tire/Wheel
(shown in home position)
F -
40mm Shaft
Note:
Throughout this manual wheel weights are
referred to as Clip-on or Tape-A-Weight™. Figure 3
shows an example of each weight.
Corrective Weight Examples. For Best Results, use BADA
®
Brand Wheel Weights.
Power Switch
The ON/OFF switch is located on the back of the
balancer.
ON/OFF Switch
Do It Now!
Now is a good time to fill out
the Owner’s Registry Card.
E
F
A
B
C
D
Clip-on Weight Tape-A-Weight