HENNESSY INDUSTRIES Coats 1185, Руководство по эксплуатации

Страница: 25 / 32

Important: Always read and follow instructions. • 19
Err.11 Speed too high error
During unbalance measurement
rotation, wheel speed is more
than 270 rpm
• Check in self-diagnostics that the encoder functions prop-
erly
• Replace the computer board
Err. 14
Err.15/
Err.16/
Err.17/
Err.18/
Err.19/
Unbalance measurement error • Check in self-diagnostics that the encoder functions properly
• Check detection unit connections
• Verify machine earth/ground connection
• Mount a wheel with more or less known unbalance (less
than 100g) and verify he response of the machine
• Replace the computer board
Err. 20 Wheel still. The wheel must
remain still for more than one
second after START
• Use the self-diagnostics function to check the encoder
• Check the connections on the power board
• Replace the computer board
Err. 21 Motor on for more than 15 sec-
onds
• Use the self-diagnostics function to check the encoder
• Check the connections on the power board
• Replace the computer board
Err. 23 Wheel positioning in proximity of
the correction position error
• Check in self-diagnostics that the encoder functions properly
• Check that there are no impediments to the rotation of the
wheel
Err. 24 Pressing the STOP button during
the measurement spin
• Check that the panel functions properly
• Do not press the STOP button during the measurement spin
Err.230/
238 Operating touch monitor errors • Restart the balancing machine
• Calibrate the touch monitor
• Check touch monitor connections
• Replace the touch monitor
Err. 240 Machine setting error • Execute the initialization function
Err. 241 Estimated width dimension • Manually set the correct rim width value before calibrating
the machine
Unbalance
incorrect
with back
centering
cones
Mount the wheel in vertical
position and push the sleeve up
against the wheel. If necessary,
repeat locking/unlocking/ locking
and perform the procedure again
• Mount the wheel in vertical position and push the sleeve up
against the wheel. If necessary, repeat locking/unlocking/
locking and perform the procedure again.