5
controller can be actuated either by the start/stop button on the front touch panel, a
footswitch(included), or external start signal. It is capable of operating in a timed or
continuous mode for dot or bead dispensing applications. The reservoir can
accommodate 50ml, 250ml, 500gram, 1 liter, and 2 kg adhesive packages which
deliver adhesive to dispensing valves. The system is also equipped with a low level
sensor which can notify the operator that the adhesive package needs to be
replaced.
With the EQ RC40 Integrated dispenser, anaerobic, UV Curing and cyanoacrylate
adhesive can be dispensed.
The capacity of the EQ RC40 Integrated dispenser is:
-500 gr. bottle for CA Products
-1 lb. bottle
-250 ml bottle for Anaerobics
-1 Liter bottle
-Bottle with a
φ
124mm and
-2kg bottle
a height of 250mm
2
Description
2.1 Theory of Operation
The Loctite EQ RC40 Integrated Dispenser is connected to an external electrical and
pneumatic supply. The system is equipped with a 0 to 7 bar (0-100psi) pressure
regulator that regulates the preset dispensing pressure of the reservoir and controls the
dispensing during the selected dispensing time. An uncovered bottle of Loctite product
is placed directly into the EQ RC40 Integrated Dispenser, the tube is inserted into the
product, and the reservoir lid is clamped in place.
It is then pressurized using clean, filtered dry air. Air within the reservoir will push down
on the liquid in the bottle and force it through the product feed line to the dispensing
valve.
The amount of product dispensed is controlled by four main factors:
-Amount of pressure in the reservoir
-Length of time the dispensing valve remains open
-Valve stroke
-Dispensing needle size
