16
5.10 Set: Low Level Mode
1. Press
, the setting for Low Level mode start to flash.
2. Press
for switching between “OFF”, “LAMP” and “LAMP + STOP”.
3. After completed setting, press
to save and exit.
Notice:
OFF: Only digital output from XS1
LAMP: Digital output from XS1 + LED Light on control panel
LAMP + STOP: Digital output from XS1 + LED Light on control panel + System Stop
5.11 Set: Lock-Out Mode
1. Press
, the setting for Lock-Out mode start to flash.
2. Press
for switch between “ON” and “OFF”.
3. After completed setting, press
to save and exit.
Notice
:
Lock-
Out Mode “ON” means all setting in the system can’t be change by pressing
button. Otherwise “Setting Locked Call Supervisor” will show on the display.
Press both
+
to change the setting when Lock-
Out Mode is “ON”.
5.12 Adjust the Level Sensor
Notice:
The level sensor is set in manufacturing and can be adjusted according to the type of
product used, the size of the bottle, and orientation of the basket with spacers if
required. If small bottles are used the supplied Bottle spacer disc can be placed in
the base of the reservoir to raise the height of the bottle to reduce the residual
adhesive in the bottle when low level is used.