Hengmei PJMP2113, Руководство по эксплуатации

Страница: 7 / 52

Tel: +86-18615559369 Web
:
www.pellet-machine-mill.co m
E-mail: lingfengzhuri@gmail.com
- 2 -
Table 1
2. Feeding device
The belt conveyor or vibrating feeding machine supply the material evenly to the chipper.
3. Discharging device
Discharging device has many kinds of forms, such as air-flow transportation, the chain type trigger
transportation, belt conveyor, bucket elevator transportation etc. But anyway, the discharging quantity
should be according to production arrangement. That is the cuted wood chips should be discharged
promptly to avoid of stock. jam. If choosing the air current transportation, this pointed must be paid
much more attention to.
III. Main Structure
Drum wood chipper is composed of base, blade roller, upper and nether (below) feeding organization,
feeding equipment, hydraulic press cushion system and electric control system.
1. Base
The machine base is welded by high strength steel plate, which is the support foundation of whole
machine. The fixed blade base support is welded together with the machine base and used for place bottom
blade base. The fixed blades is fixed on the bottom blade base through pressed block by a screw. The
bottom blade base can extract freely through hole in base wall plate s ide, it is fixed by two spline. The
wood chips fall through holes in sieve, then discharge from the machine base. The oversized wood chips
can be cutted again through fragment pole on the machine base.
2. Blade roller
The blade roller is working part of wood chipper, it is welded by steel plate (small wood chipper roller is
overall solid structure). It has better steel nature and inertia and after dynamic balance test.
Model
Force
f
（
N
）
Single Belt F lexibility
h
（
mm
）
V-Belt
Model
、
Length
V- Belt Q ty
pcs
PJMP215 58.96 17.3 C2800 4
PJMP216 63.2 21.2 C3400 4
PJMP218 66.7 22.4 C3700 6
PJMP2113 102.4 32.3 SPC-6300 8