Hengmei PJMP2113, Руководство по эксплуатации

Страница: 8 / 52

Tel: +86-18615559369 Web
:
www.pellet-machine-mill.co m
E-mail: lingfengzhuri@gmail.com
- 3 -
The main axle and the blade roller join together through locking equipment and the flat spline. Its structure
is simple, the assembling and dismantling is convenient, operation is reliable. Both sides of main axle are
supported by automatic self aligning roller bearing, bearing base is fixed on machine base.
There are two rotary blades on the blade roller, it is fixed on the blade roller by special rotary blade bolts
through pressed block.
3. Upper and nether feeding organization
The upper feeding organization is composed of upper feed roller base, feed roller, feed roller axle,
pendulum shaft and reducer.
The nether feeding organization is composed of feed roller, support roller, feed roller axle and reducer.
The feed roller diameter is big, the weight is heavy and the surface has thick tooth, then can compact raw
material, so that the raw material can enter the cutting position in balanced speed to keep the wood chips
length and quality, the upper and nether feed roller stagger mutually to clean up the scraping.
The upper feed roller is tightened with axel through locking equipment, the axel is supported by spherical
surface roller bearing, bear ing base is fixed on the upper feed roller base. The upper feed roller is fixed on
the machine base through pendulum shaft, and can swing circling pendulum shaft to ensure it can adapt
the feeding altitude automatically.
The nether feed roller is tightened with axel through locking equipment, axel and supporting roller is
supported by spherical surface roller bearing, bearing, bearing base is fixed on the machine base.
The upper and nether reducer drive the upper and nether feed roller respectively. The upper feed roller ’s
rotation direction is same to blade roller rotation direction, the nether feed roller’s rotation direction is
opposite to blade roller rotation direction.
4. Feeding equipment
The feeding equipment has the belt conveyor and vibrating feeding machine two types.
The belt conveyor is composed of head wheel, rear wheel, belt and rack. The head wheel is driven by
nether feed roller axle through chain link. The head wheel drive belt to s end raw material to feed inlet.
Vibrating feeding machine is composed of feed groove, base and driving part. Motor drives
crank-connecting rod mechanism, make the feed trough simple harmonic oscillation through eccentricity
revolving, make the raw material move ahead to feed inlet.
5. Hydraulic press cushion system