Hengmei PJMP2113, Руководство по эксплуатации

Страница: 6 / 52

Tel: +86-18615559369 Web
:
www.pellet-machine-mill.co m
E-mail: lingfengzhuri@gmail.com
- 1 -
I. Main Characte ristics
“Hengmei” brand PJMP series Drum Wood Chipper
is one kind of special equipment for producing
wood chips, widely used in the raw material preparing process in the factories of flakeboard, fiberboard,
papermaking and wood chips making plant. Small drum type wood chipper is the best equipment for
factory’s laboratory preparing material.
Raw material for Drum type wood chipper cutting is mainly small trail wood, lumbering remainds ( such
as branches, twigs, tress etc) and woodworking remainds ( such as slab, plank, log core, waste veneer etc).
It also can be used to chip non-lignin raw material (such as flax pole, bulrush, bamboo etc).
II. Installation and Feeding & Discharging System
1. Installation
(1) Installation
Wood chipper can be installed on the concrete or steel structural support foundation, and fixed by land bolt.
In order to open cover to replace rotary blade and assemble and dismantle bottom blade base, must
according to the size supplied by “installation foundation sketch up”, and ensure there is enough space.
(2) Triangle belt’s Installation
A) Before installing the triangle belt, in order to load the tr iangle belt conveniently, the space between the
belts must be reduced suitably. DONOT force to install with iron rod, preventing of damaging triangle
belt.
B) Inspect two wheels end surface's straight lines with the straightedge, guarantee two wheels end surface
in the identical plane.
(3) Triangle belt’s tension inspection
A) Adopting to press the lax side, check the bobbin to inspect the degree.
B) After machine 2-3 hours full-load running, check the V belt tension rate, and carry on essential
regulation.