Henderson ICE CONTROL FSM AUGER, Руководство пользователя

Страница: 14 / 52

Page 1-02 08/18
SAFETY
Persons who install, mount, operate, or service this equipment must be properly instructed
and warned.
Read operator manuals completely before operating equipment.
Read decal instructions, cautions, and warnings. Decals and decal locations are shown on
the following page.
Check spreader to ensure that all shields and grates are in place.
Use care when mounting and dismounting.
The drive shafts, conveyor and spinner assemblies transmit great amounts of power, and
accordingly, are hazardous when in operation. All maintenance, inspections or operator
adjustments must be made with all power off.
Keep spreader and surrounding area clear of personnel and property when operating.
When traveling, especially fully loaded, this machine may have a high center of gravity. To
avoid overturning your vehicle, care should be exercised to use slow speed when turning or
driving on banked surfaces. Avoid driving on side slopes or bumpy surfaces when loaded.
Do not leave unit unattended and running. Completely disengage spreader, stop engine, and
remove the key before leaving truck.
If unit is equipped with a stand the hopper and tanks are to be completely empty prior to using
the stand.