Henderson ICE CONTROL FSM AUGER, Руководство пользователя

Страница: 49 / 52

08/18 Page 5-01
BOLT TORQUE DATA
The chart provided contains information concerning standard hardware used on this machine. It is
recommended that all fasteners be tightened to the torque values specified. The grade of the bolt is
identified by the markings on the head of the bolt.
GENERAL BOLT TORQUE DATA IN FT/LB.
BOLT SAE-GRADE 2 SAE-GRADE 5 SAE-GRADE 8
SIZE DRY LUB DRY LUB DRY LUB
1/4-20 5 4 8 6 12 9
1/4-28 6 5 9 7 13 10
5/16-18 11 8 17 13 25 18
5/16-24 12 9 19 14 25 20
3/8-16 20 15 30 23 45 35
3/8-24 23 17 35 25 50 40
7/16-14 30 24 50 35 70 50
7/16-20 35 25 55 40 80 60
1/2-13 50 35 75 55 110 80
1/2-20 55 40 90 65 120 90
9/16-12 70 55 110 80 150 110
9/16-18 80 60 120 90 170 130
5/8-11 100 75 150 110 220 170
5/8-18 110 85 170 130 240 180
3/4-10 175 130 260 200 380 280
3/4-16 195 145 300 220 420 320
7/8-9 165 125 430 320 600 460
7/8-14 185 140 470 350 660 500
1-8 250 190 800 600 900 680
1-14 270 200 700 530 1000 740
NOTE: 1. Multiply by 1.356 for metric N-M.
2. Do not use above values in place of those specified in other sections of this manual.
GRADE 2 GRADE 5 GRADE 8
(PLAIN) (3 MARKS) (6 MARKS)