Henden H62SP Скачать руководство пользователя страница 9

Henden 6 Star 2 Speed Pump Installation & Owners Manual

Removal of the Pump from Pipework

Should it be necessary to remove the pump, follow these 
instructions:
1.  Switch off the power and remove the plug from the 

power source.

2.  Close the water valves on the pool return and the pump 

inlet pipework.

3.  Remove the discharge & suction barrel unions taking 

care not to lose the o-rings.

4.  Move the pipework with the barrel unions attached 

until the pump can be pulled clear.

NOTE: When making any 
enquiries about your Henden 2 
Speed Pump, be certain to quote 
the model number from the 
nameplate located on the motor.

NOTE: If the pump is wired into a time 
clock or another automatic control, the 
wiring should be removed by a qualified 
technician.

Water Quality

Maintaining balanced water chemistry is important to 
the life of your pool pump. This pump is designed to be 
used with pool & spa water, balanced in accordance with 
Langlier Saturation Index, with a pH level of between 7.2 
and 7.8 and is regularly treated with a chlorine sanitising 
agent with the level not exceeding 3.0 parts per million of  
free chlorine. 
Please consult your local Reece Irrigation & Pools branch 
regularly to have your water tested.

 

HENDEN

 INSTALLATION & OWNERS MANUAL 

|

 

9

Содержание H62SP













Отзывы: