Henden H62SP, Инструкция по установке и эксплуатации

Страница: 5 / 12

Henden 6 Star 2 Speed Pump Installation & Owners Manual
HENDEN INSTALLATION & OWNERS MANUAL | 5
2. PIPE CONNECTION
A barrel union is provided for to the piping from the pool.
The barrel unions are designed to accept 40mm PVC on
the ID or a 50mm PVC fitting on the OD.
The use of any pipe smaller than those specified above is
not recommended. Suction piping should be free from all
air leaks and any humps and hollows which cause suction
difficulties.
The discharge piping from the pump outlet should be
connected to the inlet connection on the swimming pool
filter (usually at the filter control valve).
Barrel unions need to be hand
tightened. No sealant, glues or
silicones are required.
ELECTRICAL DATA
Model
H62SP
RPM
Eco Flow Speed – 1450
High Flow Speed – 2850
Enclosure Class (IP)
25
Insulation Class
Class F 155 Insulation
Voltage (V)
240 AC
Supply Frequency (Hz)
50
Run current (A)
7.1
Motor Input Power (W / hp)
Eco Flow - 279W / 0.37hp
Hi Flow – 1,510W / 2.02hp
Motor Output Power (W / hp)
Eco Flow - 223W / 0.3hp
Hi Flow – 1,208W / 1.62hp
Operating Limits:
Max Water temperature 50°C
Max Ambient temperature 55°C
Dimensions:
Model A B C D E
Mounting
Holes
Diameter
Inlet
PVC
Outlet
PVC
Net
Weight
(kg)
H62SP 645 330 250 305 246 10 *40/50 *40/50 16.8
A
B
C
D
E
*Suction and discharge accept 40mm PVC pipe on the I.D. and 50mm fitting on the
O.D.