Helmholz 700-751-HSM11, Руководство пользователя, Страница: 81 / 99

Helmholz Modem 56k 4.1 81
0: Remote control OFF
1: Remote control ON
S29 Time period for modifier “flash”
Sets the time period in tenths of seconds, after which the modem hangs up due to
a flash in the dialing string.
S30 Time period until hang up due to silence
Time period, in which the modem waits without activity before hanging up. Units
in seconds (only for FAX Class 1).
S31* General settings
Bit Meaning
Bit 0 Reserved
Bit 1 Description
Connect message
0: 3-line message (
\V0
)
1: Expanded 1-line message (
\V1
)
Bit 2-3 Error correction
Messages
Messages:
0: Only PC baud rate
1: PC and phone baud rate (
ATW1
)
2: Only phone baud rate (
ATW2
)
Bit 4-7 Reserved
S36* Reset of error logs
Bit Meaning
Bit 0..2 determines what happens
if an attempt to establish
a V.42 LAP-M connection
fails. It is connected to
the registry S48.
0 Modem hangs up
1 Modem stays online and establishes a direct
mode connection.
2 Reserved
3 Modem stays online and establishes a direct
mode connection.
4 Modem attempts to establish a MNP connec-
tion. In case of failure it hangs up.
5 Modem attempts to establish a MNP connec-
tion. In case of failure a direct mode connec-
tion is established.
6 Reserved
7 Modem attempts to establish a MNP connec-
tion. In case of failure a normal mode connection
is established.
Bit 3.0.5 SMS type
0: normal fixed network modem
( AT*M0 )
1: D1 and E networks
( AT*M1 )
4: D2 network