Helmholz 700-751-HSM11 Скачать руководство пользователя страница 61

Страница: 61 / 99

Helmholz Modem 56k 4.1

Command Description

AT*N<n>=<nr

Permitted numbers for selective call acceptance

Definition of 8 authorized phone numbers, for which modem access is permitted.

Only if the transmitted phone number matches a phone number that was entered

in the list will the modem report RING for an incoming call or will accept the call

according to the settings of

ATS0

(the line RI is activated with each call, irrespec-

tive of that fact). The selective call acceptance is switched on and off with

AT&A

AT*Nn=<nr>

<n>

Describes the storage location – range of values: 0..7.

<no>

Permitted phone number consists of numbers and the wild

card “*” for exactly one character. The phone number may not

contain separators such as brackets or space characters. After

they were entered, the phone numbers are immediately saved

in the power fail-safe memory of the modem.

AT*N<n>=<nl>

The memory

N<n>

allows all phone numbers ending in

<nl>

AT*N99=

Deletes all existing entries in the list

AT*N?

Displays all stored entries

Example:

AT*N5=1234

allows all calls ending with

1234

E.g.:

0175/999

1234

, 0941/888

1234

, or +4940/777

1234

AT*N1=01234567**

permits all calls from the block of num-

bers 01234567-00 to 01234567-99

AT*N99=

Delete the list of permitted phone numbers for the selective call answer

The command

AT*N99=

deletes the entire list of phone numbers for the selective

call answer.

AT*N?

Output of the list of permitted phone numbers

AT*N?

activates the output of the entire saved list of permitted phone numbers for

the selective call answer.

AT%N

Output of the last rejected phone number

For active selective call answer (

AT&A1

) , the last phone number, whose call was

rejected, will be displayed.

Note: This phone number is not saved in the power fail-safe memory of the

modem.

ATO<n>

Return to online data mode

If the modem is in online command mode, it will return to online data mode. If
the modem is in offline command mode, it will report

ERROR

ATO0

Return to online data mode.

ATO1

Before the modem switches to online data mode, a retrain procedure

provoked.

ATP

Switch on pulse dialing method (deactivated for some models)

Starting with this command, each dial-up is performed with the pulse dialing

method, until an

ATT

ATDT

command switches it back to tone dialing.

Содержание 700-751-HSM11




































































































Результаты поиска

Содержание 700-751-HSM11

Отзывы:

Helmholz 700-751-HSM11, Руководство пользователя, Страница: 61 / 99

Результаты поиска

Содержание 700-751-HSM11

Отзывы: