background image

Helmer Scientific i.Series

®

 Platelet Incubator

Operation Manual 

360388/A

3

About this Manual

1.1 

Intended Audience

This manual provides information on how to use the Pro Series platelet incubator. It is intended for use by end users of the platelet 

incubator and authorized service technicians.

1.2 

Model Reference

This manual covers all Pro Series platelet incubators which may be identified by size or model number.

1.3 

Intended Use

 Note

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment 

is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if 

not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. 

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required 

to correct the interference at his own expense.

Helmer platelet incubators are intended to provide the controlled temperature environment required for the storage of  

platelet products.
The devices are intended to be operated by personnel who have procedures in place for meeting FDA, AABB, EU or any other 

applicable regulations for the processing and storage of platelet products.

1.4 

Safety Precautions and Symbols

Symbols found in this document

The following symbols are used in this manual to emphasize certain details for the user:

Task

  Indicates procedures which need to be followed.

Note

  Provides useful information regarding a procedure or operating technique when using Helmer  

Scientific products.

NOTICE

  Advises the user against initiating an action or creating a situation which could result in damage to 

equipment; personal injury is unlikely.

CAUTION

  Advises the user against initiating an action or creating a situation which could result in damage to 

equipment or impair the quality of the products or cause minor injury.

WARNING

 

 

Advises the user against initiating an action or creating a situation which could result in damage to 

equipment and serious personal injury to a patient or the user.
Authorized representative in the European Community

EC

REP

Содержание i.Series PC100-Pro





















Отзывы: