Helmer Scientific i.Series
®
Platelet Incubator
Operation Manual
360388/A
14
5
Electronic Access Control (Optional)
Allows user-specific secure access to the incubator. The Access Control Setup screen can be opened from the Access Log screen
or by choosing the Access Setup button from the Users and Passwords screen.
Notes
• During a power failure, the optional Electronic Access Control lock will remain locked. It can be unlocked using backup
battery power until battery power is depleted or until the backup battery switch is switched
OFF
.
• Switching the backup battery switch OFF will disable the monitoring system during a power failure.
• During a power failure, use the mechanical door key to provide secure storage for incubator contents.
• Refer to i.C
3
User Guide for complete information regarding Access Control.
5.1 Setup
Configure and manage user-specific accounts to allow controlled access to the incubator.
Access Control with Password overlay
Access Control Setup screen
Enter the supervisor PIN to set up Access Control. Follow the on-screen prompts to add, delete or edit user information.
Notes
• Initial factory supervisor PIN = 5625
• The supervisor PIN cannot be deleted, and should be changed to prevent unauthorized user ID setup. The supervisor
PIN does not allow access to the unit. At least one user ID must be set up to gain access to the unit.
5.2
Open Incubator with Access Control
Access Control Home screen
Enter a valid PIN using the keypad.
