background image

Helmer Scientific i.Series

®

 Ultra-Low Freezer

Operation Manual 

360172-A/D

16

Product Specifications

6.1 

Operating Standards

 

Indoor use only

 

♦ Altitude (maximum): 2000 m

 

♦ Ambient temperature range: 15 °C to 32 °C

 

♦ Relative humidity (maximum for ambient temperature): 80% for temperatures up to 25 °C, decreasing linearly to 53% at 32 °C

 

♦ Temperature control range: -50 °C to -86 °C

 Note

Power conditioning (voltage boost) is an optional feature. If facility voltage is consistently at or below 195 V, voltage boost must 

be installed in order to protect the compressors.

Table 2.  Electrical Specifications

Model

116

118

124

126

Input Voltage and Frequency 

208/230 V, 60 Hz

Voltage Tolerance

±10%

Circuit Breakers

12.0 A (quantity 2)

Current Draw

11.0 A

Energy Consumption

18.5 kWh/day

18.5 kWh/day

19 kWh/day

19 kWh/day

Power Source

15 A dedicated circuit

Boost Cut-in Voltage

195 V

Monitoring System Battery /  
Chart Recorder Battery

12 V, 7 Ah rechargeable sealed lead acid battery

Remote Alarm Capacity

0.5 A at 30 V (RMS); 1.0 A at 60 V (DC)

 CAUTION

•  The interface on the remote alarm monitoring system is intended for connection to the end user’s central alarm system(s)  
  that uses normally-open or normally-closed dry contacts.
• 

If an external power supply exceeding 30 V (RMS) or 60 V (DC) is connected to the remote alarm monitoring system’s

 

  circuit, the remote alarm will not function properly; may be damaged; or may result in injury to the user.

 Note

Overall exterior dimensions include casters, handle, i.C

3

 bezel, and door hinges

Table 3.  Ultra-Low Freezer Specifications

Model

Voltage Code

Amps

Capacity

 

Cu. Ft 

(Liters)

Dimensions Interior 

W x H x D in. (mm)

Dimensions 

W x H x D in. (mm)

Net Wt. 

lbs (kg)

Exterior

Overall Exterior

iUF116

208/230 V 

 

60 Hz

11.0

16

(453)

23.1 x 49.5 x 23.3 

(587 x 1257 x 592)

33.8 x 78.2 x 34.8 

(859 x 1986 x 884)

37.1 x 78.2 x 37.5 

(942 x 1986 x 953)

607

(275)

iUF118

208/230 V 

 

60 Hz

11.0

18

(510)

23.1 x 54.1 x 23.3 

(587 x 1374 x 592)

28.9 x 78.2 x 34.8 

(734 x 1986 x 884)

32.5 x 78.2 x 37.5 

(826 x 1986 x 953)

622

(282)

iUF124

208/230 V 

 

60 Hz

11.0

24 

(680)

34.4 x 49.5 x 23.3 

(874 x 1257 x 592)

45.1 x 78.2 x 34.8 

(1146 x 1986 x 884)

48.4 x 78.2 x 37.5 

(1229 x 1986 x 953)

704

(319)

iUF126

208/230 V 

 

60 Hz

11.0

26 

(736)

34.4 x 54.1 x 23.3 

(874 x 1374 x 592)

40.2 x 78.2 x 34.8 

(1021 x 1986 x 884)

43.8 x 78.2 x 37.5 

(1113 x 1986 x 953)

725

(328)

Содержание i.Series iUF116

























Отзывы: