Helmer Scientific i.Series
®
Ultra-Low Freezer
Operation Manual
360172-A/D
14
5
Access Control
Allows user-specific secure access to the freezer.
Notes
•
The Supervisor PIN must be used to set up user profiles.
•
The Supervisor PIN does not allow access to the unit. At least one user ID must be set up to gain access to the unit.
•
The Supervisor PIN should be changed to prevent unauthorized user ID setup. The Supervisor PIN can not be deleted.
•
In the event the Supervisor PIN is unavailable, contact Helmer Technical Service to reset the Supervisor PIN.
•
When setting up Access Control user IDs, ensure the key lock is in the locked position to prevent unauthorized access to
the freezer.
•
The keys provided with the freezer may be used to lock or unlock the exterior door.
• Refer to the i.C
3
User Guide for i.Series Ultra-Low Freezers for complete information regarding Access Control.
5.1 Setup
Configure and manage multiple user-specific accounts to allow controlled access to the freezer.
>
> Access Setup
Access Control Setup screen with password keypad overlay
Access Control Setup screen
Note
The
Access Setup
button can be found on the
Users and Passwords
screen or the
Access Log
screen.
Entry into Access Control Setup
1. Touch the
Access Setup
button. A numeric keypad is displayed.
2. Enter the supervisor PIN
(if entering for the first time, use the factory supervisor PIN = 5625)
.
3. Touch
to confirm. The keypad closes and the Access Control Setup screen is displayed.
Add a user profile
1. Touch the
Add User
button. An alphanumeric keyboard is displayed.
2.
Enter the User ID for the new user profile.
3. Touch the
to store the user ID. The numeric keyboard is displayed.
4.
Enter a 4-digit PIN for the new user profile.
5. Touch the
to store the user PIN. The User ID and PIN for the new user profile are displayed in the table.
