Operating Instructions • ATS3080 • 02-2017 • v01 • 102-01002
Technical data
25
9 3 Interface overview, power pack 3080
Signal
Power
ATS3080 Power Pack
6
1
2
3
4
5
1 Socket for power cable
2 Fuse
3 Socket for connection to ATS3080 or to the control boxes
4
Signal
LED
Green
: Operating voltage applied
5 LED indicator
Power
Green
: power pack 3080 switched on
6 Main switch
9 4 Tie heads and tie ribbons
• Tie ribbon (500 m × 4.5 mm × 1.2 mm (L × W × H)) of
type PA66HIRHSUV
• Tie heads (5000 items, each 9.0 mm × 8.0 mm × 5.4 mm
(L × W × H)) of type PA66HSUV
9 5 Noise and vibration information
Emission sound pressure level
L
pA
Uncertainty K
pA
71 dB re20 μPa
3 dB
Sound power level L
WA
Uncertainty K
WA
82 dB re1pW
3 dB
Aggregate figure for vibration a
h
Uncertainty K
1.0 m/s
2
1.5 m/s
2
The vibration level as stated here is a measured value
obtained by the standardised method set out in EN 62841-
1:2015; it can be used for the purposes of device
comparison.
The figure for vibration stated here is for the power tool in
conditions of its intended use and may differ from the actual
figure for the power tool if it is used differently or not
adequately serviced.
Accurately estimating vibration load over a certain work
period entails making due allowance for the times during
which the device is switched off or running, but not actually
in use. This can reduce vibration load over the entire work
period by a significant margin.
f
Implement additional safety measures to protect the
operator from the effects of vibration, for example:
• Servicing of power tools and use tools
• Keeping hands warm
• Workflow organisation.