11
SET SALT MONITOR OPTION
NOTE: This screen will not appear if system is set up as a filter or the 'set low salt warning'
is set to off. See dealer for details
Step 1US
- Press the NEXT button until SALT appears in the display. It does not matter if the
SALT display alternates with the LBS REMAINING display.
Step 2US
- Press SET CLOCK
Step 3US - Set LBS REMAINING: Use the
or
button to adjust the pounds remaining in
the brine tank.
NOTE: Estimate the pounds of salt in the brine tank and add it to the amount of salt added
to the brine tank. The example at the left would indicate 200 lbs. of salt being added to a
brine tank that has 40 lbs. remaining.
Step 4US - Press SET CLOCK to exit Adding Salt.
RETURN TO
NORMAL MODE
NOTE: The salt used per regeneration setting can be set in increments
of 0.1 pounds, but LBS REMAINING screen will round up or down to the
closet whole number.
Once the salt remaining as gone below the set point the display will
automatically flash Salt Fill.
LBS REMAINING
40
SALT
OR
STEP 1US
FILL
➔
➔
STEP 2US
SALT
LBS REMAINING
STEP 3US
0
SET
LBS
240
SET
STEP 4US
SET
LBS
240
➔
