US
ER
G
ENER
A
L
S
PE
CI
A
LI
S
T PER
S
O
NNEL
7
EN
EN
KWL Hygrobox KWL HB.. EH/WW
Installation and Operating Instructions
Electrics/Electronics
Work on the electrical system
parts may only be performed
by electricians. If maintenance work
or repairs are performed, the device
should be isolated from the mains power
supply. In case of faults in the electrical
voltage supply, shut down the device im-
mediately. Use only original fuses with
the required current strength. Check
the electrical equipment of the device
regularly. Discovered defects, such as
loose connections or scorched cables,
must be eliminated immediately. After
the electrical work or servicing has been
performed, the safety measures should
be tested (e.g. earthing resistance).
Installation site requirements
The installation of the HygroBox may
only take place in rooms that have an
existing water outlet. In addition, safety
measures that automatically close the
water supply to the HygroBox in case of
leakage (e.g. safety valve/water connec-
tion set) must be taken within the room.
The HygroBox is designed with IP20
protection.
4. Shipping and storage
4.1 DIMENSIONS AND WEIGHT
KWL HB 250
KWL HB 500
Dimensions of the packaging unit (W x H x D)
800 x 460 x 420
mm
870 x 600 x 600
mm
Weight of the packaging unit without optional accessories
28 kg
62 kg
4.2 PACKAGING
The safety labels attached to the box ab-
solutely must be observed. During deli-
very, look out for and check any damage
to the packaging or device. Problems or
damage must be reported immediately.
4.3 STORAGE
The device must be stored in the pa-
ckaging in a dry, dust-free, and frost-
protected manner. Avoid storage periods
that are too long (one year maximum).
4.4 CHECK FOR COMPLETENESS
When the device is delivered, make
sure that:
• The type and serial numbers on the
type plate correspond with the infor-
mation in the order and delivery docu-
ments.
• The equipment (optional accessories)
is complete.
• All parts are present in a perfect state.
Note:
In case of any transport damage
and/or missing parts, you must inform
the transport company or suppler im-
mediately in writing.
4.5 SCOPE OF DELIVERY
The scope of delivery includes:
• The humidification device
• Installation and Operating Instructions
• Accessories: Water connection set
(see
section 17.3)
• Optional accessories: Pumps/Mixer
connection set
(see section 17.4
)
