Helios EVS Series, Инструкция по установке и эксплуатации

Страница: 38 / 64

6
Smoke exhaust fan control system – EVS
Installation and Operating Instructions
– Fuses which are always suitable for the high motor starting current must be used. (E.g. circuit breaker with tripping charac-
teristic D or similarly slow fuses). This back-up fuse should be selected from the following table of recommendations.
All information serves as recommendations without taking the installation type, cable length and network type into account.
The actual back-up fuse and connection cable should be determined by a property-specific specialist planning team. The
cables in function-maintaining type E90 or installation type F90 must be particularly taken into account.
Controls Rated output Back-up fuse Connection cable Supply line to fan
EVS-D up to 4.00 kW 20 A 5 x 2.5 mm² 4 x 2.5 mm²
EVS-D up to 5.50 kW 25 A 5 x 4.00 mm² 4 x 4.0 mm²
EVS-SD up to 4.00 kW 16 A 5 x 1.5 mm² 2 x 4 x 1.5 mm²
EVS-SD up to 5.50 kW 20 A 5 x 2.5 mm² 2 x 4 x 2.5 mm²
EVS-SD up to 7.50 kW 25 A 5 x 4.0 mm² 2 x 4 x 4.0 mm²
EVS-SD up to 11 kW 35 A 5 x 6.0 mm² 2 x 4 x 6.0 mm²
EVS-SD up to 15 kW 50 A 5 x 10.0 mm² 2 x 4 x 10.0 mm²
EVS-SD up to 18.5 kW 63 A 5 x 16.0 mm² 2 x 4 x 16.0 mm²
EVS-SD up to 22 kW 80 A 5 x 25.0 mm² 2 x 4 x 25.0 mm²
EVS-SD up to 30 kW 100 A 5 x 35.0 mm² 2 x 4 x 35.0 mm²
EVS-SD up to 45 kW 125 A 5 x 50.0 mm² 2 x 4 x 50.0 mm²
EVS-SD up to 55 kW 160 A 5 x 70.0 mm² 2 x 4 x 70.0 mm²
EVS-DA up to 4.00 kW 20 A 5 x 2.5 mm² 2 x 4 x 2.5 mm²
EVS-DA up to 5.50 kW 25 A 5 x 4.0 mm² 2 x 4 x 4.0 mm²
EVS-DA up to 7.50 kW 25 A 5 x 4.0 mm² 2 x 4 x 4.0 mm²
EVS-DA up to 11 kW 35 A 5 x 6.0 mm² 2 x 4 x 6.0 mm²
EVS-DA up to 15 kW 50 A 5 x 10.0 mm² 2 x 4 x 10.0 mm²
EVS-DA up to 18.5 kW 63 A 5 x 16.0 mm² 2 x 4 x 16.0 mm²
EVS-DA up to 22 kW 80 A 5 x 25.0 mm² 2 x 4 x 25.0 mm²
EVS-DA up to 30 kW 100 A 5 x 35.0 mm² 2 x 4 x 35.0 mm²
EVS-DA up to 45 kW 125 A 5 x 50.0 mm² 2 x 4 x 50.0 mm²
EVS-DA up to 55 kW 160 A 5 x 70.0 mm² 2 x 4 x 70.0 mm²
With regard to EVS-FUEC, the fan is supplied with power directly from the main distribution board. The cable cross-sections should
be selected according to the motor output.
3 .2 .3 Wiring diagrams
The connection options and terminal markings of the EVS can be found in the wiring or connection diagram for the respective type.
m
ATTENTION
EN