HELI CQD16X1, Руководство по эксплуатации и обслуживанию

Страница: 95 / 105

91
Check the pedal and the mechanical working of the thumb switch. Check the
returning springs. Check whether the digital resistor can go to its max. value or its set
value or not. Check them every three months.
Check the mechanical working of the contactor. Check whether there is a
seizure or wear of the contactor point. Check them every three months.
Check should be done by skilled person only. All spare pats should be original.
The installation of the controller should be done according to the manual strictly. Any
change or special requirements can be done only after consulting our company. We
will take no responsibility on the fault caused by the disparity between the dealer and
the content of this manual.
Any cause which is visible or reliable by an ordinary technician who
periodically checks the equipment, which can create damage or defects to the device,
should be transferred to our dealer. Our dealer will carry out a purposeful handling.