HELI CQD16X1, Руководство по эксплуатации и обслуживанию

Страница: 55 / 105

51
7) Support the side shifter assembly 2 with lifting equipment or other proper
method. After the pix axle 8 as shown in figure 4-8-10 is removed, the side shifter
assembly 2 in figure 4-8-10 can be removed. Place the side shifter assembly on the
ground horizontally.
8. Lift the inner fork plate with lifting equipment and remove the pin axle 7 as
shown in figure 4-8-10.
9) Remove the inner fork plate and outer fork plate.
10) Remove the limit ring 26 and limit pin axle 27 as shown in figure 4-8-10.
Remove the lock cover 23 and shim 24.
11) Remove the scissor plate assembly 4 as shown in figure 4-8-10.
Figure 4-8-11 Structure of side shifter assembly
12) Remove the pin axle 12 as shown in figure 4-8-11. Divide the side shifter
assembly into two parts. The rear parts of fork carrier 1,tilting cylinder 15, top block
of tilting cylinder 21, pin axle of top block 16 and auxiliary top rod 23 belong to the
rear part and others are front part.
13) Remove the pin axle of top block 16 as shown in figure 4-8-11. Remove the
top block of tilting cylinder 21 and auxiliary top rod 23.