HELI CQD16X1, Руководство по эксплуатации и обслуживанию

Страница: 40 / 105

36
1) Disconnect battery;
2) Remove backrest and fork from fork carrier;
3) Remove the guard and pipeline guard;
4) Connect a lifting equipment with telescopic fork to lift the telescopic fork and
make the chain to under loose state. Remove the chain from the lifting cylinder. If
necessary, change the sealing parts on top of the lifting cylinder.
Note: the telescopic fork assembly is easier to be kept under vertical position when it
is retracted back.
5) Remove the chain, control cable, hydraulic pipeline, chain wheel seat, chain wheel
and pulley carrier on the telescopic fork assembly. Then lift the telescopic fork
assembly from the inner mast top end with lifting equipment. Put two wood battens
on the ground and lay the telescopic fork on them horizontally.
6) Remove the front lifting cylinder.
7) Connect a lift equipment on the inner mast. Lift the inner mast and make the chain
to be loose. Remove the chain nuts.
8) Remove the control cables, hydraulic pipeline, chain and pulley from the top of
middle mast and lower end of inner mast. Mark the positions of all parts. The left side
is different from the right side.
9) Lift the inner mast from the middle mast top end with lifting equipment. Then lay
the inner mast horizontally on the ground.
10) Remove the bolts and fixing clip on the rear lifting cylinder. If necessary, change
the sealing parts on top of lifting cylinder.
11) Remove the rear lifting cylinder.
12) Lift the middle mast and remove it from outer mast top end. Put the middle mast
horizontally on the ground.
4.8.8.2 When disassembling with limited space
If the head height is not enough for the mast to be lifted to a certain height for