HELI CQD16X1, Руководство по эксплуатации и обслуживанию

Страница: 60 / 105

56
the travel switch or foot safety switch, the truck can travel and the is off. The
truck can travel and the lifting function is normal.
Press the button and light on the meter is on. At this time, the
truck is under brake condition and the traction system of the truck can not work. press
the button again, the light on the meter is off. At this time, the truck is
stand by and traction system works.
(3) Battery electricity quantity display: there are 9 LED lights to shown the battery
electricity quantity. When the truck gets electricity, the 9 LED lights are on when the
battery is full. The LED lights reduces with the reducing of battery electricity quantity
during discharging. When the battery electricity quantity is reduced to 15% that
means only one LED is on, the fault alarm light and undervoltage alarm light
will flicker at the same time. At this time, the truck will slow down and the
lifting function is cut off in order to protect the battery. At this time, charge the battery
in time.
Figure 4-9-4
(4) Hour meter: when the truck get electricity, the hour meter begins to
work. Uses can maintain the truck according to the hours suggested in hour meter
referring to the regulated maintenance time in OPERATION & MAINTENANCE
MANUAL.
(5) Fault code display: if fault occurs, the symbol is on all the time. Fault
code and control module code where fault occurs are shown in the diplay.
For the fault code and fault description, please refer to the fault diagnosis or
consult HELI dealer. The definition of each control module is followed:
Fault code
Control module code