Heinner HWDM-H10614B, Руководство пользователя

Страница: 5 / 72

www.heinner.com
•
Ensure that all four feet are stable and resting on the floor and then check that the
washing machine is perfectly level (use a spirit level).
•
Ensure that the ventilation openings in the base of the washing machine (if available
on your model) are not obstructed by a carpet or other material.
4. Water inlet
•
Connect the water supply inlet hose in accordance with the regulations of your local
water company.
•
Water inlet – depending on models
Single inlet – cold water only
Dual inlet – Hot and cold water
•
Water tap: ¾ threaded hose connector.
5. Drain
•
Connect the drain hose to the siphon or hook it over the edge of a sink by means of
the "U" bend supplied.
•
If the washing machine is connected to an integrated drainage system, ensure that
the latter is equipped with a vent to avoid simultaneous loading and draining of
water (siphoning effect).
•
Fix the drain hose securely to prevent scalding during machine drainage.
6. Electrical connection
•
Electrical connections must be carried out by a qualified technician in compliance
with the manufacturer's instructions and current standard safety regulations.
•
Data regarding voltage, power consumption and protection requirements is given on
the inside of the door.
•
The appliance must be connected to the mains by means of a socket with an earth
connection in accordance with current regulations. The washing machine must be
earthed by law. The manufacturer declines all liability for damage to property or
injury to persons or animals due to non­compliance with the directions given above.
•
Do not use extension leads or multiple sockets. Make sure the capacity of the socket
is powerful enough to drive the machine during heating.
•
Before any maintenance on the washing machine disconnect it from the mains
supply.
•
After installation, access to the mains plug or to disconnection from the mains supply
must be ensured at all times via a double­pole switch.
•
Do not operate the washing machine if it has been damaged during transport. Inform
the local dealer.
•
Mains cable replacement is only to be carried out by authorized service.
•
The appliance must only be used in the household for the prescribed uses.