Heinner HWDM-H10614B, Руководство пользователя

Страница: 17 / 72

www.heinner.com
Connect the drain hose to the drain or hook it over the edge of a sink by means of the "U"
bend.
Fit the "U" bend E, if not already installed, at the end of the drain hose.
Notes:
•
Ensure that there are no kinks in the drain hose.
•
Secure the hose so that it cannot fall down. After wash phase, machine will drain out
hot water.
•
Small hand basins are not suitable.
•
To make an extension use a hose of the same type and secure the connections with
clips.
•
Max. overall drain hose length: 2.50 m
Transport/Handing
Never lift the appliance by the worktop when transporting.
•
Pull out the mains plug.
•
Turn off the tap.
•
Disconnect the inlet and drain hoses.
•
Eliminate all water from the hoses and from the appliance (see "Removing the Filter",
"Draining Residual Water")
•
Fit the transport bolts (obligatory)
•
The machine is over 55 kg in weight, two persons are needed to move it.
Electrical connection
Only use a socket with an earth connection.
•
Do not use extension leads or multi sockets.
•
Electric supply must be adequate for the machine's 10 A Current Rating.
•
Electrical connections must be made in accordance with local regulations.
•
The electrical power cable must be replaced exclusively by a licensed electrician.