Heinner HWDM-H10614B, Руководство пользователя

Страница: 21 / 72

www.heinner.com
Drainage warning
If the pipe is squeezed, drainage will not be smooth. In case of failing to completely drain for
long time, display screen will prompt “F03” to give alarm.
Door lock icon
After the program starts the Door Lock icon will light up and the door will be locked.
•
After completing program, door lock unlocks automatically. During pause, if door
opening condition can be met halfway, the door lock will unlock and its indicator light
will go out.
•
When door lock indicator light flashes, door shall not be opened forcibly so as to
avoid personal injury.
Delay end function
Delay End function allows to run the machine at the consumers’ convenience, for example,
at night when electricity is cheaper.
Only under the standby mode, this button is valid for selecting the reservation time.
•
After the reservation function is selected, the time will increase 1h when each time
the reservation button is pressed. Before reservation, if the program time does not
satisfy the integral multiple of 1h, it shall be completed by pressing the reservation
key for the first time, and then the time increases 1h when each time the reservation
button is pressed. If the reservation is selected, before the program runs, the current
reservation can be canceled by turning the button to select other programs.
•
The delay time must be longer than the wash program length as the delay time is the
time program will finish. For example: if the selected program time is 02:28, the delay
time selected must be between 03:00 and 24:00.
•
When the reservation process is operated, the icon of ‘reservation time’ will be on.
When the reservation process is finished, the icon of ‘reservation time’ will be off.
•
If delay end is selected and start button is not pressed, delay can be canceled by
rotating rotary knob before starting.
•
To cancel the delay time during the delay program, you need turn the machine off by
pressing “On/Off” button for 2 seconds.
Mute function
When the machine is in the state of holding, pause or operation, press “Spin+ Options”
buttons for 2 seconds, The display will show “bEEp oFF” . All the buzzing will be turned off
except the alarms.
When the machine is in the mute state, press “Spin+ Options” buttons for 2 seconds until
“bEEp on” appears. All the buzzing will be activated.