Heinner HWDM-H10614B, Руководство пользователя

Страница: 16 / 72

www.heinner.com
Press the double­sided tape on four sides manually to secure the noise­reduction plate to the
machine body firmly.
Connect the water supply inlet hose
If the water inlet hose is not already installed, it must be screwed to the appliance. The blue
marked hose is only for cold water. Depending on the model, the hot water hose marked with
red should also be connected, for models having dual inlets.
Screw by hand the inlet hose onto the tap, tightening the nut.
Attention:
•
No kinks in the hose
•
The appliance must not be connected to the mixing tap of an unpressurized water
heater.
•
Check water tightness of connections by turning the tap completely on.
•
If the hose is too short, replace it with a suitable length or pressure resistant hose
(1000 kPa min)
•
Check the inlet hose regularly for brittleness and cracks and replace if necessary.
•
The washing machine can be connected without a non­return valve.
Connect the drain hose
In case the drain hose is installed as shown below:
Unhook it only from the right clip (see arrow)
Hot (depending on models)
Cold