43
Electrical Connection and Safety (if available)
WARNING: The electrical connection of this appliance should be carried out by an
authorised service person or qualified electrician, according to the instructions in this
guide and in compliance with the current local regulations
.
WARNING
: The appliance must be earthed.
•
Before connecting the appliance to the power supply, the voltage rating of the
appliance (stamped on the appliance identification plate) must be checked for
correspondence to the available mains supply voltage, and the mains electric wiring
should be capable of handling the appliance’s power rating (also indicated on the
identification plate).
•
During installation, please ensure that isolated cables are used. An incorrect
connection could damage your appliance. If the mains cable is damaged and needs to
be replaced this should be done by a qualified person.
•
Do not use adaptors, multiple sockets and/or extension leads.
•
The supply cord should be kept away from hot parts of the appliance and must not be
bent or compressed. Otherwise the cord may be damaged, causing a short circuit.
•
If the appliance is not connected to the mains with a plug, a all-pole disconnector (with
at least 3 mm contact spacing) must be used in order to meet the safety regulations.
•
The appliance is designed for a power supply of 220-240 V~. If your supply is different,
contact the authorized service personnel or qualified electrician.
•
The power cable (H05VV-F) must be long enough to be connected to the appliance.
•
The fused switch must be easily accessible once the appliance has been installed.
•
Ensure all connections are adequately tightened.
•
Fix the supply cable in the cable clamp and then close the cover.
•
The terminal box connection is placed on the terminal box.
