Heinner HCM-1200D, Инструкция по эксплуатации

Страница: 16 / 45

www.heinner.com 1000W, 50Hz, 230V
15
VI. CLEANING AND MAINTENANCE
3) Press the “ON/OFF” button twice, and the green lamp of AUTO will be
illuminated. After about 10 seconds, the LCD will display the current clock,
and you may see the automatic start time by pressing “PROG” button.
Note : You may cancel the automatic start function by pressing the ON/OFF button. If
you want to change the automatic start time, just follow the above steps again.
At 1:00 pm, the green lamp of AUTO will be extinguished, and the red lamp of RUN will
be illuminated. The appliance will start automatically. After brewing, you can replace
the carafe from the keeping warm plate. Once the coffee maker is energized, the coffee
can be kept warm. If you leave the coffee maker unattended for
40 minutes
, the
appliance
will turn off its power automatically.

Hints for great-tasting coffee:
1. A clean coffee maker is essential for making great-tasting coffee. Regularly
clean the coffee maker as specified in the “Cleaning and maintenance” section.
Always use fresh, cold water in the coffee maker.
2. Store unused coffee grounds in a cool, dry place. After opening a package of
coffee grounds, reseal it tightly and store it in a refrigerator to maintain its
freshness.
3. For an optimum coffee taste, buy whole coffee beans and finely grind them
just before brewing.
4. Do not reuse coffee grounds since this will greatly reduce the coffee’s flavor.
Reheating the coffee is not recommended as coffee is at its peak flavor
immediately after brewing.
5. Clean the coffee maker when over-extraction causes oiliness. Small oil droplets
on the surface of brewed, black coffee are due to the extraction of oil from the
coffee grounds.
6. Oiliness may occur more frequently if heavily roasted coffees are used.
Caution : Be sure to unplug this appliance before cleaning. To protect against electrical shock,
do not immerse the cord, plug or the unit in water or other liquid. After each use, always make
sure the plug is first removed from wall outlet.