Heinner HCM-1000XMC, Руководство пользователя

Страница: 18 / 58

www.heinner.com 1000W, 50Hz, 230V
17
CAUTION: Be sure to unplug this appliance before cleaning. To protect against
electrical shock, do not immerse cord, plug or unit in water or liquid. After each use,
always make sure plug is first removed from wall outlet.
1) Clean all detachable parts after each use in hot, sudsy water.
2) Wipe the product’s exterior surface with a soft, damp cloth to remove stains.
3) Water droplets may buildup in the area above the funnel and drip onto the product
base during brewing. To control the dripping, wipe off the area with a clean, dry cloth
after each use of the product.
4) Use a damp cloth to gently wipe the adiabatic plate. Never use abrasive cleaner to
clean it.
5) Replace all parts and keep for next use.
REMOVING MINERAL DEPOSITS.
To keep your coffee maker operating efficiently, you should clean away the
mineral deposits left by the water regularly according to the water quality in
your area and the frequency use the appliance, the detail is as follows:
1. Fill the water tank with water and descaler to the MAX level in the gauge of
coffee maker (the scale of water and descaler is 4:1, the detail refers to the
instruction of descaler.
Please use “household descaler”, you can use the citric acid instead of the
descaler (the one hundred parts of water and three parts of citric acid).
2. Push jug on adiabatic plate, pay attention to let center line of jug aligns with
that of brew basket.
3. Press the on/off button once and the indicator in it will be illuminated red.
After a while, water will drop out automatically.
4. After percolate the equivalent of one cup and then switch off the appliance
by pressing the on/off button twice again. The indicator in it will be illuminated
blue, after about 15s, it will be extinguished.
5. Leave the solution work for 15 minutes, repeat the steps of 3-5 again.
6. Turn the appliance on by pressing the on/off button once and run off the
water until the water tank is completely empty.
7. Rinse by operating the appliance with water at least 3 times.
VI. MAINTENANCE AND CLEANING