Heinner HCM-1000XMC, Руководство пользователя

Страница: 16 / 58

www.heinner.com 1000W, 50Hz, 230V
15
3. Add coffee powder into filter. Usually a cup of coffee need a level spoon of
coffee powder, but you may adjust according to personal taste. Then close the
top lid.
4. Place the lid on the jug, let the triangle on the jug aligns with the triangle on
the lid (seefig. 1), then turn the lid clockwise until the lid cannot move any
longer (see fig. 2). Then, insert the steel vacuum jug on adiabatic plate
horizontally.
Fig. 1 Fig. 2
5. Plug the power cord into the outlet. The LCD will display “12:00” and the
colon will flash, but all the button lights will not illuminate.
6. Press on/off button, the indicator in it will be illuminated red. The appliance
will begin working.
7. The brewing process can be interrupted by pressing the on/off button twice
again at any time, and the indicator in it will be illuminated blue and stop
flashing, after about 15s, it will be extinguished. The appliance will continue
brewing once on/off is pressed again.
Note: You can take out the jug, pour and serve at any time. The appliance will
stop dripping automatically. But the time cannot exceed 30 seconds.
8. Remove out the jug to serve when finish brewing (about one minute later
after the coffee stops dripping out.)
Note: the coffee you get will less than the water you have added, as some
water is absorbed by coffee ground.
9. Always turn the coffee maker off and disconnect the power supply when not
use.
10. The coffee can be kept warm in the steel vacuum jug, suggest the time of
keeping warm is not more than 1 hour. For an optimum coffee taste, serve it
just after brewing.
Note: pay attention to pour the coffee out, otherwise you may be hurt as the
temperature of coffee just finished is high.