HEINKEL Tourist, Руководство пользователя

Страница: 43 / 74

38
Gear change control
The gear is changed by twist–grip control on the handlebars. Gear change from handlebar to
gear shift lever is by two Bowden cables. Locking of the gears in the twist–grip can be suited to
the touch of the driver by adjustment of the screw (between the figures). For readjustment of the
gear–shift, adjuster screws are provided on the clutch cover (see Fig.9). For easy gear–changing,
the two control cables should not be too taut. The protective sleeves of the Bowden control cables
should turn freely at the adjuster screws, but without any play. Then set twist–grip gear control to
1st or 4th gear (for this, it is a good idea to put the scooter up on its stand, so that the rear wheel is
free) and, by pushing the adjuster screws on the clutch cover in and out, so adjust the gear control
cables that when the rear wheel is turned, the gear set at the twist–grip control is engaged. By
changing gear at the twist–grip control, check whether 1st and 4th gears engage properly when
required; correct if necessary once again at the adjuster screws and then tighten the lock nuts on
the adjuster screws.