HEINKEL Tourist, Руководство пользователя

Страница: 26 / 74

21
DRIVING AND OPERATION OF CONTROLS
Removing scooter
from stand
Take hold of handlebars and push machine forward. At the same
time place your left foot in front of stand to avoid movement, and
roll machine off stand.
When the engine has been started (neutral gear), pull the clutch
lever and turn the gear control twist–grip to position 1. Gradually
open the throttle and let in the clutch very gently by slowly
releasing the lever. Driving speed is controlled by the twist–grip
throttle control. The 4–speed gearbox operates smoothly and
easily. Engage gears gently. Do not force gears into position.
Changing up into
a higher gear
After the machine has reached approximately 12 m.p.h., close the
throttle, disengage the clutch, change up into second gear, open
up the throttle again and let in the clutch as before. At a speed of
approximately 24 m.p.h., repeat the same procedure to change
into third gear, and at a speed of 28/35 m.p.h., change into
fourth gear.