HEINKEL Tourist, Руководство пользователя

Страница: 42 / 74

37
Clutch
Power is transmitted to the gearbox by means of a multi–plate clutch. Special care must be taken
that the clutch lever on the handlebar has 1/16”–1/8” play. If there is too much play, the clutch
does not disengage freely; too little play causes the clutch to slip and results in rapid wear. The
adjuster screw for the clutch control cable is placed on the left hand engine housing cover. Lifting
the rear body cowling facilitates clutch adjustment. Turn in the adjuster screw to increase clutch
play (Fig.8). If the adjustment of the Bowden control cable screw has reached its limit, the original
adjustment can be regained by using the
adjuster screw on the clutch worm. Before
adjusting, release the return spring. Make
sure to tighten locknut and fasten return
spring after adjustment.
(
Adjusting the Clutch
1. Lock nut
2. Adjuster screw
3. Lock nut
4. Clutch cable adjuster screw