HEIL PT 1000 Скачать руководство пользователя страница 122 | Manualshive

Страница: 122 / 202

HEIL PT 1000 Скачать руководство пользователя страница 122

Issued September 2017
On-Route Operation Procedures

Copyright 2017, Heil Environmental

Printed in U.S.A.

114

LOADING REFUSE WITH A REEVING
MECHANISM (CONTINUED)

DANGER

Your body or clothing can become caught by the blade
while it moves. Serious injury or death may occur if a
person is in or near the hopper when the blade and slide
assembly move. Clear the area near the hopper of all
unnecessary people before you move the blade and slide
assembly and keep all parts of your body away from the
blade.

CAUTION

The slide in/out and blade up/down operations can push
refuse out of the hopper or break objects. Refuse broken
by the blade can cause moderate or minor injury. Stay
clear of the packer panel during slide in/out and blade up/
down operations.

3. Sweep the refuse from the hopper and pack it into

the body.

a. PULL the slide and blade levers at the same time

and RELEASE the levers. The levers will self-
center at the end of the commanded position by
way of valve internal hydraulic pressure. See

.

b. The slide will move OUT and the blade will move

UP. STOP the blade UP operation when the blade
is at the pinch point with the hopper sill.

c. Watch for refuse that is pushed out of the hopper.

NOTES:

109

«
...
120
121
122
123
124
...
»

Содержание PT 1000











































































































































































































Отзывы:

Нет отзывов