Heiko Thermal 12, Руководство пользователя

Страница: 95 / 132

4. Usage
This is for adjusting how fast Backup Heating Sources for heating operation will be turned ON
if heat pump unit can't provide enough power. The bigger the value is set, longer time it takes to start the
Backup Heating Sources if heat pump capacity is not enough.
10.06) Water Temperature Rise Reading Interval
Time interval for checking the temperature increase when unit works in DHW mode . If
temperature increases too slow during this set interval time , unit will activate other heating
source for DHW operation .
The smaller the value is set , unit is more likely to activate AH or HWTBH for a fast heating
of DHW.
If system has no HWTBH ( set via parameter 10.03 ), or HWTBH has lower priority than AH
( set via parameter 10.04 ):
◆ If heat pump capacity is not enough to heat up DHW fast enough , unit starts AH . If after
AH starts, it still cannot heat up DHW fast enough, HWTBH starts.
◆ When the set and actual water temperature is higher than heat pump maximum allowable
water temperature , heat pump stops and unit starts AH . If after AH starts , hot water temperature
still increases too slow, HWTBH starts.
If system has HWTBH ( set via parameter 10.03 ), and HWTBH has higher priority than AH
( set via parameter 10.04 ):
Backup Heating for DHW
If system has HWT H ( set via parameter 10.03 ), and HWTBH has higher priority than AH
( set via parameter 10.04 ):
◆ When the set and actual water temperature is higher than heat pump maximum allowable
water temperature, HWTBH works ALONE for DHW while heat pump unit will work in heating or
cooling mode according to demand.
◆ When actual water temperature is lower than heat pump maximum allowable water
temperature , heat pump works in hot water mode . If heat pump capacity is not enough to heat up
DHW fast enough, unit starts HWTBH. If after HWTBH starts, hot water temperature still increases too
slow, AH starts.
Under shifting priority operation , according to parameter 3.08 , AH or AH + HWTBH work
together with heat pump to heat sanitary hot water to the set value as soon as possible, so heat pump
unit can concentrate on heating mode afterwards.
10.07) Emergency Operation
When heat pump failed to work , whether the unit should turn ON the back - up heating
system automatically .
Note : If this function is activated , customer should check the working status of heat
pump unit occasionally , to ensure heat pump unit is functioning well .
B
9 95