HEIDENHAIN ND 1200 - V2.16, Руководство по эксплуатации, Страница: 83 / 141

ND 1200 QUADRA-CHEK 83
2.2 Har
dw
a
re
Installation
Connecting an optional foot switch or remote
keypad
The optional foot switch and remote keypad are connected to the
RJ-45 connector on the side of the ND 1200.
Often, only the optional foot switch or remote keypad is used.
However, two options can be connected simultaneously using a RJ-45
splitter.
The RJ-45 connector and splitter are shown here:
The foot switch and remote keypad can be used individually or in
combination:
„
foot switch
„
foot switch and remote keypad
When the foot switch and remote keypad are connected using the RJ-
45 splitter, all operating functions of each device are retained.
However, the switch shares Hot Key mapping with the number keys
7 and 8 of the remote keypad. As a result, functions assigned to the
two switch contacts will also be mapped to remote keypad numbers
7 and 8.
To connect the foot switch or remote keypad:
U Verify that the ND 1200 is off.
U Plug an RJ-45 splitter into the ND 1200 RJ-45 connector if multiple
devices will be used.
U
Connect the RJ-45 plug of the devices into the RJ-45 splitter if
multiple devices will be used, or directly into the ND 1200 RJ-45
connector if only a single device will be used.
RJ-45 connector and RJ-45 splitter
Optional foot switch and remote keypad
1
2
1 RJ-45 connector
2 RJ-45 splitter
RJ-45 splitters are available from most retail electronics
stores.
Hot keys are discussed later in this chapter under
Software setup/Hotkeys. See "Hot key assignments" on
page 118.