HEIDENHAIN ND 1200 - V2.16, Руководство по эксплуатации, Страница: 55 / 141

ND 1200 QUADRA-CHEK 55
1
.7 T
o
ler
a
ncing
Applying tolerances
The method of applying tolerances is identical for all feature types. To
apply a tolerance:
U Highlight a feature in the feature list using the ARROW CURSOR
keys.
U Press the TOL soft key to display the tolerance soft keys.
U Press the soft key corresponding to the desired tolerance type, such
as runout for a circle. A new screen will be displayed containing data
fields for nominal and tolerance values.
U Enter the nominal and tolerance values and then press the FINISH
key to display the tolerance results. Press the finish key again to
return to the DRO screen.
Measurements that pass tolerance tests are indicated by a checkmark
in the tol soft key box. Measurements that fail are indicated by a
crossed circle in the Tol soft key box and by outlined characters in the
DRO screen.
Passed tolerance indicated by
checkmark in TOL soft key box Failed tolerance indicated by crossed
circle in TOL soft key box and outline
characters
An example of applying a tolerance is shown on the next
page.