HEIDENHAIN ND 1200 - V2.16, Руководство по эксплуатации, Страница: 18 / 141

18 1 Operation
1
.2 Basic F
unctions of the ND 120
0
Panel key descriptions
Descriptions of panel key functions are provided in the following
pages for MEASUREMENT function, COMMAND, MODE selection,
AXIS, FAST TRACK, SEND, LCD ON/OFF, and MENU keys. Soft key
functions are also described later in the next section as part of screen
and soft key layout descriptions.
ND 1200 Panel keys
MEASURE keys Function
Measure point: Press the POINT key once to
measure one point, or twice to use auto
repeat to measure a series of points. A
minimum of one data point is required to
measure a point.
Measure line: Press the LINE key once to
measure one line, or twice to use auto repeat
to measure a series of lines. A minimum of
two data points are required to measure a
line.
Measure circle: Press the CIRCLE key once
to measure one circle, or twice to use auto
repeat to measure a series of circles. A
minimum of three data points are required to
measure a circle.
Measure distance: Press the DISTANCE key
once to measure one distance, or twice to
use auto repeat to measure a series of
distances. Two points are required to
measure a distance.
Measure angle: Press the ANGLE key once
to measure one angle, or twice to use auto
repeat to measure a series of angles. Collect
a minimum of two data points, then press the
ENTER key on each leg of an angle.
Align part: Press the SKEW key to
compensate electronically for non-square
part alignment on the primary axis.
Use Measure Magic: Press the MEASURE
MAGIC key to automatically measure any
geometric feature or twice to measure a
series of like features. Collect the desired
points and press the FINISH key; Measure
Magic analyzes the data and determines the
feature type.