manualshive.com logo in svg

HEIDENHAIN ND 1200 - V2.16, Руководство по эксплуатации, Страница: 133 / 141

Поделиться
Скачать
HEIDENHAIN ND 1200 - V2.16 Скачать руководство пользователя страница 133

ND 1200 QUADRA-CHEK

133

2.3 Sof

tw

a

re

 set

u

p

Saving settings files and programs

The Supervisor screen contains tools for saving ND 1200 configuration 
settings files which include any ND 1200 programs and error 
correction data. Settings files are saved to the root of a USB drive. 

To save settings files:

U

Insert a USB drive into the USB port.

U

Press MENU/SETUP to display the setup menu and then highlight 
the Supervisor menu item.

U

Highlight the Password data field and enter the password.

U

To save the configuration parameters (settings.bin file): press the 
SAVE soft key, then follow the instructions displayed on the screen.

U

Press the FINISH key to save parameters and return to the setup 
menu.

Settings files should be saved any time configuration 
changes are made, error correction data is collected or 
programs are created or modified.

Enter the Supervisor password

Содержание ND 1200 - V2.16














































































































































Отзывы:

Нет отзывов