HEIDENHAIN GAGE-CHEK 2000 Series, Руководство по эксплуатации

Страница: 91 / 236

Commissioning | Configuring the axes
Ascertaining the line count per revolution
For angle encoders with interfaces of the type 1 V
PP
or 11
μ
A
PP
you can use a
teach sequence to ascertain the exact line count per revolution.
Tap Settings in the main menu
Tap
Axes
Tap the desired axis designation or Not defined , if applicable
If applicable, select the name of the axis from the Axis name
drop-down list
Tap
Encoder
From the Encoder model drop-down list, select Angle
encoder
For Display mode select the - ∞ ... ∞ option
Tap
Reference marks
Select one of the following options from the Reference mark
drop-down list:
None : There is no reference mark
One
: The encoder has one reference mark
In order to switch to the previous axis, tap Back
To start the teach sequence, tap Start
The teach sequence is started and the wizard is displayed
Follow the instructions of the wizard
The line count determined during the teach sequence is
transferred to the
Line count field
The ascertained line count remains stored if you select a different
display mode after the teach sequence.
Further information: "Settings for encoders with interfaces of the type 1 V
PP
or
11 A
PP
", Page 197
7
HEIDENHAIN | GAGE-CHEK 2000 | Operating Instructions | 08/2020
91