HeatSeeker VORTEXC, Инструкция по установке и эксплуатации

Страница: 25 / 32

9.3 INSTALLATION INSTRUCTIONS
9.3.1 Mounting
Find a suitable location to mount the VortexLink box. Ideally, as with all pool equipment, it should be
installed out of direct weather and no closer than 3m from the water’s edge and a minimum 600mm
above ground. Fix the mounting bracket to a solid structure and slide the VortexLink on, keeping in mind
that the power cable is 1.8m long and should be plugged directly into a general power outlet, not into
an extension lead.
9.3.2 Pump
The filtration pump plugs into the 240V outlet beneath the VortexLink.
9.3.3 Chlorinator
The chlorinator connects directly into a general power outlet, not into an extension lead. Plug the
black 2 pin power lead from the VortexLink into the chlorinator. Set the chlorinator to operate for the
required filtration and dosing requirements.
Heatseeker VortexC Inverter Heat Pump
Installation & User Manual
23