8
3.5 SPOUT ASSEMBLY
Fit the 1/2”BSP nut to the inner container boss.
1.
Remove the spout clamp.
2.
Fit the spout through the back plate and grommet.
3.
Re-fit the spout clamp (ensure the spout clamp ribs engage with the spout
4.
and hold it securely in place)
Tighten the 1/2” BSP nut.
5.
Ensure the grommet is re-seated (snapped to the backplate)
6.
Fit the spout front to the spout body (see figure 8 overleaf).
7.
FIGURE 06 - PLUMBING DIAGRAM
INLET
WATER
HEATER
SERVICE
VALVE
FLOW
RESTRICTOR
WATER
SUPPLY
FIGURE 07: SPOUT
SPOUT
GROMMET
SPOUT CLAMP
BSP NUT
X2 SCREWS
