23
11. Decommissioning
11.1 Decommissioning procedure
`
Isolate electrical supplies and make safe
`
Isolate the water supply
`
Drain the cylinder
`
Drain the primary circuit (indirect only)
`
Remove cylinder
`
Cap pipework
12. Spare parts
Table 7: Spares
12.1 Spare parts list
A full range of spare parts are available for the cylinder range. Refer to the Technical Data label on the unit to identify
the model installed and ensure the correct part is ordered.
DESCRIPTION
SPARES NUMBER
1
Immersion heater (lower)
95606984
2
Immersion heater (upper)
95606986
3
Immersion heater gasket
95611822
4
Immersion heater backnut
95607869
5
Immersion heater key - not shown
95607861
6
Tundish - not shown
95605838
7
Expansion valve - 6bar
95605899
8
Cold water combination valve complete
95605897
9
Cold water combination body
95605900
10
Pressure reducing valve cartridge 3.5 bar
95605898
11
Temperature/Pressure Relief Valve
95605810
12
Expansion vessel 12 litre (100,120 and 150 litre models) - not shown
95607863
13
Expansion vessel 18 litre (170 and 210 litre models) - not shown
95607864
14
Expansion vessel 24 litre (250 and 300 litre models) - not shown
95607612
15
Blanking plate assembly - not shown
95605881
16
Nut & olive pack (4 of each) - not shown
95607838
17
Direct combined Thermostat and Thermal cut-out
95612717
18
Indirect combined Thermostst and Thermal cut-out
95612716
19
6 way terminal block
95607933
20
3 way terminal block
95607932
21
2 port motorised valve (22mm connections) - not shown
95605819
Environmental information
Products are manufactured from many recyclable
materials. At the end of their useful life they should be
disposed of at a Local Authority Recycling Centre in
order to realise the full environmental benefits.
Insulation is by means of an approved CFC/HCFC free
polyurethane foam with an ozone depletion factor of
zero.
